SR808ac Cable Modem User Manual
37
Regulatory Mode:
Selects either 802.11d or 802.11h modes of operation. These are amendments to the
802.11 specifications for solving interference issues with other transmission systems
such as satellite or radar, and also transmission requirements in different parts of the
world.
TPC Mitigation (dB):
Transmit Power Control mitigation factor in dB. Transmit Power Control is used to
automatically reduce the transmission power when other networks are within range.
This setting is only used when the Regulatory Mode is set to 802.11h.
OBSS Coexistence:
Enable/Disable Overlapping BSS Coexisistence. OBSS coexistence refers to the
ability of the AP to support 20 MHz devices within 40 MHz channels. It also allows the
AP to better deal with nearby 20 MHz devices that are interfering with part of its 40
MHz channel.
STBC Tx:
STBC :Space Time Block Code. Switch to on will obtain the full antenna gain.
Scan Wireless AP’s:
Force the Modems Access Point to scan for other AP’s within receive range.
Apply:
When any of the above settings are changed, the Apply button must be clicked in
order to activate them.
5.6.2
Radio
Choose
Wireless > Primary Network
to display the following page.
Country
First Channel
Last Channel
USA
1
11
Worldwide, China, Europe
1
13
Japan, Thailand, All Channels
1
14
Israel
5
7
Jordan
10
13
