1
2
Insert part J into part I. Align the
hole of part I with the correct hole
in part J. Use Phillips screwdriver
(N) to attach the screw to the nut.
WARNING: Nut must be inserted
correctly and secured.
Keep the nut in place, remove
the screw from part I by
turning counter clockwise.
-8-
Steps 6-7
Parts needed to complete this section
7a
N
J
I
1
2
WARNING: This product should be used on
safe ground, it should not be used near steps,
slopes, roadways, public highways or wet areas.
6a
2
1
Remove the securing pin with
securing lock.
CLICK!
6b
1
2
3
WARNING: Ensure safety
pin is inserted correctly
and secured.
Insert the parent handle (I) into the retaining
hole on rear of trike. Insert the pin with
safety lock. Turn the pin until you hear a click.
