CAT-601S Auto Transmission Cleaner and Fluid Exchanger User’s Manua
l
9
1
）
Start the vehicle to warm up the fluid inside the
transmission to normal temperature and fill the new
transmission fluid with desired amount into it.
2
）
Check if the pipelines are well connected.
3
）
ATF exchange: as shown in Fig.14, you can
directly input the fluid amount to be changed, as
well as you can obtain the amount by selecting
Vehicle Selection option.
Fig.14
5.1 Direct Input
Select Direct Input, and press OK key to OK into the next
interface, and then input the fluid amount to be changed
(the default value is 10L), as shown in Fig.15.
Fig.15
Be sure that there is no leak in the pipelines and press
OK key to exchange, as shown in Fig.16.
Fig.16
After the exchange operation is finished, the system will
automatically pop up print menu. Press OK key select
print, press RETURN key to cancel printing. Refer to
Fig.17
Fig.17
Print is completed, the system will return to the interface
as shown in Fig.14.
5.2 Vehicle Selection OK
Select Vehicle Selection option, and press OK key you
can see the vehicle model menu as shown in Fig.18.
Fig.18
Select the menu path of the specific vehicle model to OK
the testing interface which displays the fluid amount to be
changed, as shown in Fig.19. If the testing is not passed,
the screen will display the operations which need to be
performed, as shown in Fig.20, Fig.21, Fig.22 and Fig.23
Fig.19
Fig.20
