BEFORE YOU START:
•
Read all instructions carefully
•
Identify all parts and check quantities against parts list
•
Select a level site
•
Do not mark cladding with pencil as lead can cause corrosion to cladding
•
During assembly, ensure all drill filings are removed between layers of steel, before riveting together
SAFETY:
•
Do not attempt to build your shed in high winds
•
Beware of sharp edges, we recommend that you use gloves
•
Protect your eyes and ears
•
For ease of assembly, use a friend to help
TOOLS REQUIRED:
WARRANTY REQUIREMENTS
:
The following maintenance process needs to be adhered to, to qualify for the steel warranty of your Duratuf Smart store
shed.
•
Wash all surfaces annually using a hose and soft nylon brush.
•
Within 2 km of coast –
wash every 3 months as above. After a storm, wash the cladding and the gutters as soon
as possible to remove any highly corrosive salt deposits.
•
Volcanic Ash Fallout –
wash as soon as possible, removing fall out from roof and gutters.
•
Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding
.
CONGRATULATIONS ON PURCHASING A DURATUF SMART STORE SHED.
BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS:
2
DRILL
RIVETER
3.5mm DRILL BIT
HAMMER
LADDER
TAPE MEASURE
HEX DRIVE
NAIL PUNCH
SQUARE DRILL BIT
SKILL SAW
(timber floor only)
Summary of Contents for SM2525
Page 1: ...ASSEMBLY INSTRUCTIONS SM2525 BASE SIZE 2 520m x 2 520m ...
Page 2: ......
