SETUP GUIDE
SMART ROOM SYSTEM WITH SKYPE FOR BUSINESS
19
1026558 Rev 03
c. If your organization’s business day is 12 hours, select
12 Hour Setting
, and then select the
appropriate time frame in the drop-down list.
OR
If your organization’s business day is not 12 hours, select
Custom Setting
, and then select the
start and end times for your organization’s business day.
d. Select the days of the week your organization operates.
NOTE
The room system enters power saving mode outside of the business hours you define in
this screen.
e. Click
SMART Hardware Settings
.
f. Confirm that all room system components are listed on this screen. If a component isn’t listed,
do the following:
o
Ensure the component’s USB cable is properly connected to the room system appliance.
o
If the missing component is a SMART Board 8055i-G5 or 8065i-G5 interactive flat panel,
ensure Skype for Business Room System software 15.12.02 or later is installed (see
Procedure 7: Updating Skype for Business Room System software
g. Continue to step h.
To calibrate and orient touch on the interactive flat panels
h. If SMART Settings isn’t open from the previous steps, click
OEM Settings
, and then click
SMART Settings
.
SMART Settings appears.
i. Press
SMART Hardware Settings
.
j. Press the first interactive flat panel’s icon.
TIP
When you press an interactive flat panel’s screen, the circle beside that interactive flat
panel’s icon turns blue.
k. Select
Advanced Settings
from the drop-down list.
