SETUP GUIDE
SMART ROOM SYSTEM WITH SKYPE FOR BUSINESS
20
1026558 Rev 03
l. Press
Calibrate
.
The calibration screen appears. This can take a few moments.
NOTE
If the calibration screen doesn’t appear on the selected interactive flat panel, move it to the
selected interactive flat panel by pressing the spacebar on the keyboard.
m. Follow the on-screen instructions to calibrate and orient the interactive flat panel.
n. If you’re configuring a room system with two interactive flat panels, repeat steps i to m for the
second interactive flat panel.
NOTE
You don’t need to calibrate or orient the console.
o. Continue to step p.
To optimize the camera
p. If SMART Settings isn’t open from the previous steps, click
OEM Settings
, and then click
SMART Settings
.
SMART Settings appears.
q. Click
SMART Hardware Settings
.
r. Click the camera’s icon.
s. Click
Preview
.
The
Camera Configuration
window opens.
t. Select the mains power line frequency for your country (50 Hz or 60 Hz), set the pan, tilt and
zoom as appropriate for the meeting room’s size, make any other necessary changes to the
camera settings, and then click
OK
.
NOTES
o
Avoid using digital zoom unless necessary because it can reduce the perceived quality
of the video.
o
Physically tilt the camera lens before using the digital tilt settings.
o
Digital pan and tilt options are available only when the camera is zoomed in.
u. Click
OK
.
SMART Settings closes.
v. Continue to
