Device Tab
*See pg 9 for more details on G-Sensor thresholds.
Camera
Enable the desired camera channels.
EXT-Devices
Used to enable S3 port in order to
connect an external device (such as
RFID reader).
Misc.
•
TV Out: enabled to provide signal to the
monitor. Event Only option turns off the V/O
signal completely unless it’s configured on the
event tab
•
TV Out Event Only: When enabled, there will be
no video signal at all unless event trigger is set
(see Liveout Channel setting on Event tab)
•
TV Out OSD: set what information is displayed
on the LCD monitor (
•
Audible Camera Chime: turn audible alert on or
off (audible alarms can be individually turned
on/off per event).
G-Sensor Axis
Set the CP4’s installed position. This is
Important for proper G-Sensor calibration and
accurate drive data reporting.
Delayed Power Shutdown
: Amount of time CP4
stays powered on after ignition is turned off.
Wakeup Interval
: Time interval in which the CP4
will automatically power up again after shutdown
Register Interval
: How long the CP4 stays
powered on during the wakeup interval.
