The settings shown here are recommended for Telematics solutions using Smart API
Audio
recording can be turned on or off here
Record Tab
Resolution
: chose from D1, HD (720p) or FHD (1080p)
Frame Rate
: Choose from 30, 15, 10, 5, 4, 3, 2, or 1
Quality
: Standard, High, or Super. (The lower the quality,
the more compressed/lossy the video output).
Please refer to
to determine
storage times based on the chosen settings here
Record Modes
Event:
Only events are recorded, event video
duration determined by the pre & post event setting
Continuous
: Records video continuously, no events
(events can still be sent to Smart API server if
configured on the Server tab)
Dual Mode
: Records continuous at 1FPS + events at
the specified FPS
*If Dual Mode is set, you can adjust the SD card
partition for event and continuous video here
Telematics Data
(DRV file) is recorded and
stored separately from video and events. Set
the local storage duration here.
Parking Mode
reduces the FPS to 1
when the vehicle is idle for 5 minutes
(Continuous Mode option only)
Tamper Detection
ensures that MDT files are not
tampered/manipulated. When using SmartWitness
PC software, any MDT file which is not an original
MDT file will populate a warning. Tamper setting
must also be enabled on the PC software
