SmartWitness or your service provider will
provide you the URL and (if necessary) the
License Key to enter here.
Select the events here which the CP4 will
transmit to the server in real-time. These
events will transmit instantly even if CP4 is
set as “Continuous” record mode.
Click ‘Save’ and select the “FHDRM” SD drive
when prompted. This will save your
configuration to the card. Wait for the
software to confirm the settings have been
applied to the SD Card.
You can now eject the SD from your PC and
insert into CP4 and power on.
You can also save the settings as default to the config tool software by clicking “settings” and “Save
current settings as default”
Server Tab
Transmit Live Tracking Data
: Check to enable
http posts from the CP4 to server. Livetrack2
contains GPS coordinates. LiveTrack3 does not.
Transmit Event Data
: Check to enable CP4 posting
event notification and images to the server.
Transmit Telematics Data
: Check to enable CP4 to
send DRV data (static/compressed file containing
drive data from every second the vehicle is in
operation.
Transmit Emergency Call
: Check to transmit
ecall/Severe Shock events.
NOTE: The frequency interval of LiveTrack and DRV
uploads are controlled by the server.
