Configuring the SMART-I’s Wireless Mode
ADHOC
This mode is for Computer to Computer WiFi connections.
You will need to specify the SSID, Security Key and Channel
your AD HOC network uses.
The SMART-I’s WiFi mode can be changed to the following:
uAP
This is the standard mode, in this mode the SMART-I will be a
Wireless Access Point, and will allow other devices to connect
directly to it.
You can configure this mode as follows:
Security Key
Add a security key to prevent unauthorised
connections to the SMART-I’s access point.
SSID
Change the name of the SMART-I’s wireless
network.
Channel
Allows you to change the channel number
that the SMART-I’s access point uses.
Changing channel can help improve the
signal, especially if there are many other
wireless networks in use at your location.
18
