11. Make sure the unit is turned off before inserting
the SD Card.
12. Insert the SD memory card into the SD card slot.
Please Note
7. You will presented with another drop down list to select the Card to format.
8. Select the “DRIVERREC” from the drop
down and tick the “Quick Format” box
when prompted.
9. Click “Start” to begin formatting.
4. Double click the software icon to load the software. (Below)
5. Click the ‘Tool’ button
6. Select the “SD Card Initilise” button from the drop down
menu
3
10. Once the card has been formatted, you will see the
screen on the right. Then, remove the SD Card from
the computer.
The very first time you power up your unit with the SD Card
inserted, it is important not to disconnect the power before
the 2 minutes are up, as this may damage the unit.
www.smartwitness.com
Please Note
