1. Attach the double-sided adhesive
tape to the unit.
2. Secure the SVC100GPS to the
windscreen behind the rear view
mirror. Please make sure that the
surface is clean and dry before attaching.
3. Adjust camera view and make
sure the lens has an unobstructed
view.
5. Connect the SVC100GPS to the
cigarette lighter socket.
STEP 3: INSTALLATION
4. Arrange the power cord neatly
alongside the windshield and
door pillar trim. Use the provided
wire splice clip.
Please don’t attempt to permanently wire this unit
unless you are familiar with auto wiring.
Any incorrect installations will not be covered by
the warranty
.
For a full wiring description,
please see the manual.
Tip:
Hold in position
with firm
pressure for
30 Seconds
4
SVC100GPS-LCA/-LCA2
www.smartwitness.com
SVC100GPS
- Designed for DIY Fitting
- Professional Installation Recommended
