32
G-Sensor setting
If G-sensor sensitivity value is high (8 or 9), it may be too sensitive, it will detect
even a light impact or light turn. If G-sensor sensitivity value is a low setting (1 or 2),
it might not detect a notable incident. Sensitivity should be set in consideration of a
vehicle’s suspension and also the road condition
.
Date / Time
SVC150GPS’s built-in GPS allows it to automatically synchronize it’s time.
The time recording is done based on UTC timing and will then automatically convert
this to the local time
on the user’s PC (according to the PC time zone setting when
playing back using the Smart Witness Analysis Software). However the user can
override this function and set the time manually.
If you use a NEW SD Memory card you MUST format it first.
1.
Insert new SD memory card into the PC.
2.
Run “SmartWitness”
3.
Select [ ] setting viewer program and then click [Init SD card]
We recommend that you format the SD Card at least once a month to
reduce the possibility of any software errors.
Drive Recorder Settings
