www.smartwitness.com
5.
Wiring Connectivity
Power and Car Signal Input
Blue, yellow, green, and white cables pulse are optional.
Only power (red) and ground (black) are required.
Connecting Cameras 1, 2, & 3 (5V, 2.5mm stereo)
1.
All SmartWitness 5V cameras can plug n play into camera channels 1, 2, & 3 on SVC400
2.
Compatible camera models end in “-S”, such as the SVA033-S
3.
All”-S” cameras have a 1ft. lead from the camera lens and include a 16ft. extension cable (33ft cable
also available)
4.
Simply plug the 2.5.mm stereo cable into the desired camera input.
Camera ch1 must be used with a camera, otherwise SVC400 will have an error (for example,
you can connect cameras to ch1 & ch4 only, but NOT to ch2 & ch4)
NOTE: You can use any analog camera with Ch 1,2, & 3, but you will need to use the provided RCA adaptors
SmartWitness “-S” cameras are powered from the SVC400 recorder cam inputs 1, 2, & 3 only
Fuse 250v
3A
Green (12v Alarm
Input)
White (Speed
Pulse -> VSS)
Yellow (12v Alarm
Input)
Red (IGN+)
Black (BAT-)
Blue (5v Alarm
Output)
Required
Optional
