6
SVC400L - Installation Instructions
4.5 Vibration
Install a built-in vibration absorber for HDD.
4.6 Accessories
The SVA400L, cameras, wires and other accessories need to be placed at secure spots so that they won’t be misused
and/or destroyed by passengers and/or driver. Additionally do not install the unit/accessories that may restrict the
normal functions of the vehicle.
Do not attach any devices which are not specified by instructions and/or the manufacturers list of
authorised/compatible accessories.
4.7 Injury
The SVA400L, cameras, wires and other accessories need to be properly installed to prevent damage; and all
transportation regulations should be followed to avoid passenger injury.
4.8 Maintenance
To clean surface(s) of the SVA400L, only use cleansers that are approved for electrical equipments. Do not use
unspecified chemicals or household cleansers.
5. INSTALLATION TOOLS
Please ensure that you have the following tools available prior to commencing an installation:
Drill and bids
Screws
Wire cutters and wire connectors
Test for voltage and electric current
6. INSTALLATION INSTRUCTIONS
Follow these guidelines when installing SVC400L:
Unpack all components provided in the package.
Disconnect any source of power supply and/or devices.
Locate a proper spot to install the SVA400L and install a built-in vibration absorber if required.
Locate a reliable electrical ground point in the vehicle.
All wires and connections should be gathered to the back of SVA400L.
Connect to a power source and turn on the vehicle ignition to test the unit.
Meet all legal requirements for installing and/or operating a video surveillance, such as labelling all the essential
information on the SVA400L. Video surveillance statues vary across nations; please abide to the local statues.
