5
/
49
Driving
file
record
The DRV (Driving) file will be recorded during driving even if there are no events or video. The DRV file is
consist of GPS and G‐sensor data and it helps to find specific data or driving behaviors.
The DRV file overwrites the oldest data. The DVR files will be made every 10 minutes.
Communication
The USB 3G/4G modem is attached to the USB terminal.
To use the USB3G/4G modem at BX2000, please contact your local distributor.
(LED
operation
of
the
communication)
Communication modem is properly recognized, Green LED lights when the state can communicate.
Communication LED (green) will flash when communication is actually performed.
(Buzzer
sound
operation
of
the
communication)
Buzzer will sound as follows when the buzzer does not at the time of the communication, but
communication error has occurred.
‐ Communication error: "beep, beep" (twice)
‐ Communication modem recognition errors: "beep, beep, beep" (3 times)
Over
speed
Excessive speed can be set in two stages.
Over speeding 1:60 Km, over speeding 2: 80 Km
(LED
operation
of
the
over
speeding)
Over Speeding1: The orange LED lights up for 5 seconds.
Over Speeding2: The Red LED lights up for 5 seconds.
(Buzzer
sound
operation
of
the
over
speeding)
Trigger sound will be "Ping pong, Ping pong," said when the over speeding occurs both excessive speed 1
and 2.
SD
card
initialization
Insert the SD card you want to initialize then connect the power.
Press and hold the Reset button for more than 3 seconds once the 4 LED four will start flashing in sequence
about 20 seconds after the power on.
The Blue and Green LED flashes at the same time initialization of the SD card will begin.
Initialization operation of the SD card is 90 seconds from 10 seconds depending on the size of SD card.
Initialization of the SD card is completed the product will restart automatically.
Once complete, all files will be deleted and the configurations will default to the factory settings.
(LED
operation
of
the
SD
card
initialization)
The Blue and Green LED flash at the same time.
(Buzzer
sound
operation
of
the
SD
card
initialization)
Buzzer will not sound.
*
Warning
Please do not remove the SD card during initialization.
There is a possibility that the SD card can be destroyed.
