Setting Allow access network outside the rules
To set allow access network, perform the following steps:
1. Choose
Firewall
>
IP Filtering
.
2. Set
Allow access network
outside the rules.
3. Click
Submit
. As shown in Figure 5-40.
Figure 5- 40
Setting Deny access network outside the rules
To set allow access network, perform the following steps:
1. Choose
Firewall
>
IP Filtering
.
2. Set
Deny access network
outside the rules.
3.
Click
Submit
. As shown in Figure 5-41.
Figure 5- 41
Adding IP Filtering rule
Add an IP address filtering rule, perform the following steps:
1. Choose
Firewall
>
IP Filtering
.
2. Click
Add list
.
3. Set
Service
.
4. Set
Protocol
.
5. In the
Source IP Address Range
box, enter the source IP address or IP address segment to
be filtered.
6. In the
Source port range
box, enter the source port or port segment to be filtered.
7. In the
Destination IP Address Range
box, enter the destination IP address or IP address
Summary of Contents for SGL4010
Page 1: ...SGL4010 User Manual ...
