P 10
w w w . s m a x . c o m . t w
Chapter 3.
Internet
網際網路
VR1
PC
Network Camera
4+2 ports
PoE Switch
xDSL Modem
Router
3.1. Network Environment Setting
SMAX camera supports both intranet and
internet structure. Hereby to supply different
ways of network setting when SMAX camera is
under internet environment structure.
A.
True IP address setting
B.
Transfer from UPnP router
C.
PPPoE connection setting
Structure as shown on the right
Please run the SMAX Finder and search the
local LAN camera.
Please enter you static true IP address which
provided by your ISP service vender. Then
press enter.
Notification
:
Please contact your ISP vender for further
static true IP address setting or service.
Internet and Intranet setting structure illustration
Notification:
When you have the true IP address, you may set your network camera in static IP
mode. Then you may use the internet browser by entering this static true IP address
to access your network camera.
If your true IP address was set to your router, you may use the port forwarding
function and turn on the UPnP function within your network camera to connect. This
is the solution that solves the problem when a SMB surveillance project has lack of
true IP address to manage. However, please noted that the performance of the
camera will be strongly depends on the performance of the router. It may cause
abnormal connecting due to this issue. <Please refer to 3.1. B. setting >