W
INDOWS
NT 4.0 D
RIVER
I
NSTALLATION
11
RTS Threshold
- Set the RTS threshold to the same as that
used by the other devices in your network. (For details see
page 11) (Default: Disabled)
Power Saving
- You may enable the “PowerSaveMode” for
reducing power loading. (Default: 2432; that is disabled)
WEP
- For more secure data transmission, set the “Use Wep” to
“128 bit” or “64 bit” to ensure wireless network security. The
advanced Wired Equivalent Privacy (WEP) is implemented in
this card to prevent unauthorized access. The 128-bit setting
gives a higher level of security, but the setting must be the
same as the other clients in your wireless network. (Default:
Disabled)
Authentication Algorithm
- Set this to the same as the other
devices in your network. SMC devices use “Shared Key.”
Devices from some other vendors use “Open System.”
(Default: Shared Key)
7.
After driver installation, the system will prompt you to restart
the computer. Click “NO” if you want to continue installation
for your network protocols and options.
8.
Select the Services tab and Click “Add...” to install the network
protocols you want to use, such as IPX/SPX, NetBEUI or TCP/
IP. If you install TCP/IP, be sure to set the appropriate
Gateway, DNS Server, and Domain for your network.
9.
If you install an IPX/SPX-compatible protocol, then you also
need to install the “Client for NetWare Networks.”
10.
Click on the “Identification” tab on the Network dialog box,
and specify your computer name and network workgroup.
11.
Restart your computer.
Summary of Contents for ACC2632W
