C
HAPTER
4
| Configuring the Router
Forwarding
– 80 –
2.
Modify the information.
3.
Click the Save button.
4.
Click the
Enable All
button to make all entries enabled
5.
Click the
Disabled All
button to make all entries disabled.
6.
Click the
Delete All
button to delete all entries
N
OTE
:
When the trigger connection is released, the according opening ports
will be closed.
N
OTE
:
Each rule allowed to be used only by one host on LAN synchronously.
The trigger connection of other hosts on LAN will be refused.
N
OTE
:
Incoming Port Ranges cannot overlap each other.
DMZ
Select
Forwarding -> DMZ
from the menu; you can view and configure
the DMZ host in the screen (shown in
).The DMZ host feature
allows one local host to be exposed to the Internet for a special-purpose
service such as Internet gaming or videoconferencing. DMZ host forwards
all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP
Address assigned to it because its IP Address may be changed when using
the DHCP function.
Figure 66: DMZ
To assign a computer or server to be a DMZ server:
1.
Click the Enable radio button
2.
Enter the local host IP Address in the DMZ Host IP Address field
3.
Click the Save button.
N
OTE
:
After you set the DMZ host, the firewall related to the host will not
work.
