C
HAPTER
4
| Configuring the Router
WPS
– 48 –
3.
For the configuration of the wireless adapter, selected “Enter a PIN into
my access point or a registrar” in the WPS configuration, as below, and
click Next.
Figure 30: WPS-Enter a PIN into my access point
N
OTE
:
In this example, the default PIN code of the adapter is 16952898, as
shown in the above figure.
Method Two:
Enter the PIN from my Router.
1.
Read the Current PIN code of the Router in
(each Router has
its unique PIN code. This example has the Router PIN code 12345670).
2.
For the configuration of the wireless adapter, select “Enter a PIN from
my access point” in the WPS configuration utility, as below, and enter
the PIN code of the Router into the field after “Access Point PIN”. Then
click Next.
