28
Step 3:
Set
Multilink Usage
parameters. This determines how the
SMC7301TA utilizes the two B channels for your Internet connection.
Available options are:
One B Channel Only:
SMC7301TA will only use one B channel.
Two B Channels Only When Needed:
SMC7301TA will initiate a connection
with one B channel, and bring up the other B channel only if the traffic
increases to a point when more bandwidth is n eeded.
Always two B Channels:
SMC7301TA will always establish both B Channels
to access the Internet.
Step 4:
Select
Data Service
. Available options are
Data Over Voice Channel
,
64K
,
56K
, and
Auto
. Recommended selection is
Auto
.
Step 5:
Enter
Remote Sub Address Number
if necessary.
Step 6:
Select
STAC compression
option.
Step 7:
Set
Idle Timeout
number. The range is from 0 to 3600 seconds.
Step 8:
Select
Advice of Charge Support
option and enter the
Unit Price
and
Currency
in the corresponding blanks if th e selection is
Yes
.
Step 9:
Click
OK
to return to the main configuration screen and skip to next
step. Otherwise click
Alternative Number
if there is one or more alternative
remote phone numbers. Enter the alternative remote phone number in the
corresponding blanks. Then press
OK
to return to the previous screen. Again
press
OK
to return to the main configuration screen.
Step 10:
Click
Apply and Test
