51
Step 1:
From the
IP Filtering Configuration
screen, select the WAN profile
of interest from the pull down menu. For example, if your only need is to
access the Internet, you should only select the Internet access profile.
Step 2:
Select
send
or
discarded
as desired, which is equivalent to allow and
disallow, respectively.
Step 3:
If you are just starting, click
Add
to add a new selection rule. If you
have previously defined rules, you will see those rules shown as entries in the
rule table, and you can edit the rule by first highlighting the desired entry in
the rule table followed by clicking the
Edit
button.
Step 4:
In case of adding a new selection rule, the foll owing screen shows.
