C
ONFIGURING
THE
B
ARRICADE
TM
4-22
ATM PVC
To configure your Internet Connection settings, select
ATM PVC
, then
VC1
. Click the VC to set the detailed parameters.
Note:
The Barricade can support up to 8 Virtual Circuits (VC's).
Multiple VC's, in general, are only used in the case of Triple Play
(Internet/Voice/Video) services. Example: VC1 = Internet,
VC2 = Voice, VC3 = Video. Unless stated by your ISP, you will
use a single VC. In this case "VC1"should be used.
Parameter
Description
VC1 to VC8
Click on the desired VC to configure the connection parameters.
VPI/VCI
Displays the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) configured for the corresponding VC.
Encapsulation
Displays the Encapsulation configured for the corresponding
VC. Encapsulation specifies how to handle multiple protocols at
the ATM transport layer.
•
VC-MUX: Point-to-Point Protocol over ATM Virtual
Circuit Multiplexer (null encapsulation) allows only one
protocol running per virtual circuit with less overhead.
•
LLC: Point-to-Point Protocol over ATM Logical Link
Control (LLC) allows multiple protocols running over one
virtual circuit (using slightly more overhead).
Protocol
Displays the Protocol configured for the corresponding VC.
Summary of Contents for Barricade SMC7904BRA2
