SMC Networks Barricade SMCBR21VPN Manual Download

Page: 197 / 251

196

Detect Ping of Death Attack:

Select this option to detect the attacks of tremendous trash data in PING

packets that hackers send to cause System malfunction. This attack can

cause network speed to slow down, or even make it necessary to restart the

computer to get a normal operation.

Detect IP Spoofing Attack:

Select this option to detect spoof attacks. Hackers disguise themselves as

trusted users of the network in Spoof attacks. They use a fake identity to

try to pass through the SMC BR21VPN System and invade the network.

Detect Port Scan Attack:

Select this option to detect the port scans hackers use to continuously scan

networks on the Internet to detect computers and vulnerable ports that are

opened by those computers.

Detect Tear Drop Attack:

Select this option to detect tear drop attacks. These are packets that are

segmented to small packets with negative length. Some Systems treat the

negative value as a very large number, and copy enormous data into the

System to cause System damage, such as a shut down or a restart

Filter IP Route Option:

Each IP packet can carry an optional field that specifies the replying address

that can be different from the source address specified in packet’s header.

Hackers can use this address field on disguised packets to invade LAN

networks and send LAN networks’ data back to them.

Summary of Contents for Barricade SMCBR21VPN




























































































































































































































































Search results

Summary of Contents for Barricade SMCBR21VPN

Reviews:

Related manuals for Barricade SMCBR21VPN

Brands by name

Popular brands

SMC Networks Barricade SMCBR21VPN, Manual

Search results

Summary of Contents for Barricade SMCBR21VPN

Reviews:

Related manuals for Barricade SMCBR21VPN

Brands by name

Popular brands