- 10 -
In addition to the above fittings and hose nipples, the below fittings can
also be attached to the cylinder. When using the below fittings be sure to
provide a speed controller after adjusting it to 500 mm/sec or less.
5) Piping connection to the cylinder
A hose nipple consists of two parts: a fitting body and a box nut.
There are two sizes, one is for O.D.4mm / I.D.2.5mm tube and the other is for O.D.6mm /
Urethane tube
Nylon tube
Box nut
Fitting body
Gasket
To cylinder port or elbow joint