background image

Power Clamp Cylinder / 

Series 

CKZ3T

Made to Order 2

Contact SMC for detailed dimensions, specifications and delivery.

Power clamp cylinder with manually operated handle

3

Applicable model : 

CKZT25, 40, 50, 63, 80

<Features>

• Applicable to equipment requiring manual clamps.
• Handle unit R/L is replaceable. 
• Self-weight drop prevention when unclamping (excluding ø25 and ø40)

Applicable model : 

CKZT50, 63, 80

<Features>

• Applicable to all air circuit equipment.
• Built-in mechanical valve. 

Position detection is possible at clamping or unclamping according to the signal 
received from the mechanical valve.

1  

ø50, ø63 and ø80 types have the iron clamp body.

2  Rubber cover specification

 Iron clamp body and rubber cover 

specifications

Power clamp cylinder with pneumatic sensor

4

Bore size (mm)

ø

50

 Equivalent

ø

63

 Equivalent

ø

80

 Equivalent

30

°

, 45

°

, 60

°

, 75

°

, 90

°

, 105

°

, 120

°

, 135

°

Unclamping side: Rubber bumper

0.8 MPa

–10 to 60° (No freezing)

1.0 sec. to clamp, 1.0 sec. to unclamp

Angle
Cushion
Maximum operating pressure
Ambient and fluid temperature
Minimum operating time

Cylinder Specifications

Bore size (mm)

ø

25

ø

50

Equivalent

ø

40

ø

63

Equivalent ø

80

 Equivalent

30

°

, 45

°

, 60

°

, 75

° 

90

°

, 105

°

, 120

°

30

°

, 45

°

, 60

° 

75

°

, 90

°

, 105

°

105

°

Unclamping side: Rubber bumper

0.8 MPa

–10 to 60° (No freezing)

1.0 sec. to clamp, 1.0 sec. to unclamp

Angle

Cushion
Maximum operating pressure
Ambient and fluid temperature
Minimum operating time

Cylinder Specifications

Pneumatic 
sensor

Clamping

Unclamping

Clamping

With cover removed

Unclamping

Clamping output 
signal pressure port

Signal pressure 

supply port

Unclamping output 
signal pressure port

Mechanical valve

Series

Angle

Special product number

Handle unit R

Handle unit L

CKZT25
CKZT40
CKZT50
CKZT63
CKZT80

CKZT25-105-DCL752EL
CKZT40-

-DCL9476N

CKZT50-

-DCK9412K

CKZT63-

-DCK9414K

CKZT80-

-DCK9416K

105

°

30

°

, 45

°

, 60

°

, 75

°

90

°

, 105

°

, 120

°

30

°

, 45

°

, 60

°

, 75

°

, 90

°

, 105

°

CKZT25-105-DCN1935N
CKZT40-

-DCN9992N

CKZT50-

-DCK9413K

CKZT63-

-DCK9415K

CKZT80-

-DCK9417K

Series

Angle

Special product number

CKZT50
CKZT63
CKZT80

30

°

, 45

°

, 60

°

, 75

°

, 90

°

, 105

°

, 120

°

, 135

°

CKZT50-

-DCK9388K

CKZT63-

-DCK9389K

CKZT80-

-DCK9390K

Made to

  Order

22

Summary of Contents for CKZ2N Series




































Reviews: