EX600-W
Series
Specifications
Trademark
EtherNet/IP
®
is a registered trademark of ODVA. Inc.
Base Module:
EX600-WEN
m
Item
Specifications
EtherNet/IP™
communication
Communication protocol
EtherNet/IP™ (Conformance test version: Composit 12)
Transmission medium (cable)
Standard Ethernet cable (CAT5 or higher, 100BASE-TX)
Communication speed
10 Mbps/100 Mbps
Communication method
Full duplex/Half duplex
Configuration file
EDS file
*
1
IP address setting
Manual/BOOTP, DHCP
Device information
Vendor ID: 7 (SMC Corp.)
Device type: 12 (Communication Adaptor)
Product code: 186
Topology
Star, Bus, Ring (DLR), Line, Tree
QuickConnect™ function
Applicable
DLR function
Applicable
Web server function
Applicable
Wireless
communication
Protocol
SMC original protocol (SMC encryption) V.1.0
Radio wave type (spread)
Frequency Hopping Spread Spectrum (FHSS)
Frequency
2.4 GHz (2403 to 2481 MHz)
Number of frequency channels
79 ch (Bandwidth: 1.0 MHz)
Communication speed
250 kbps
Communication distance
10 m (Depending on the operating environment)
Radio Law certificate
Refer to the SMC website for the latest information regarding in which countries
the product is certified.
Electrical
For control/input
(US1)
Power supply voltage
24 VDC
±
10%
Current consumption
150 mA or less
For output
(US2)
Power supply voltage
24 VDC
±
10%
Max. supply current
4 A
Input/Output
Number of
inputs
System input size
Max. 1280 points together with the registered remote modules
Input size
Max. 128 points (increase or decrease by 16 points)
Number of
outputs
System output size
Max. 1280 points together with the registered remote modules
Output size
Max. 128 points (increase or decrease by 16 points)
Analog
input/output
AD refresh time
10 ms or less (the input connected to the base module)
0.1/0.2/0.5/1/2/5/10/30/60 s
(the input connected to the remote module)
*
2
DA refresh time
10 ms or less (the output connected to the base module)
0.1/0.2/0.5/1/2/5/10/30/60 s
(the output connected to the remote module)
*
2
Valve output
Output type
EX600-WEN1: Source/PNP (−COM)
EX600-WEN2: Sink/NPN (+COM)
Number of outputs
Max. 32 points (0/8/16/24/32 points)
Connected load
Solenoid valve with surge voltage suppressor of 24 VDC and 1.5 W or less (manufactured by SMC)
Number of remote modules connected
Max. 127 units (0/15/31/63/127 units)
Number of connected EX600 I/O units
Max. 9 EX600 series I/O units (I/O = 128. I/O above 128 cannot be recognized.)
General
Enclosure
Conforms to IP67 (with manifold assembled)
Ambient temperature (Operating temperature)
−10 to +50
°
C
Ambient temperature (Storage temperature)
−20 to +60
°
C
Ambient humidity
35 to 85% RH (No condensation)
Withstand voltage
500 VAC for 1 minute between external terminals and metallic parts
Insulation resistance
10 M
Ω
or more (500 VDC between external terminals and metallic parts)
Vibration resistance
Conforms to EN 61131-2
5
≤
f
<
8.4 Hz 3.5 mm
8.4
≤
f
<
150 Hz 9.8 m/s
2
(Excludes valve manifold)
Impact resistance
Conforms to EN 61131-2
147 m/s
2
, 11 ms
(Excludes valve manifold)
Standards
CE marking
Weight
300 g
NFC
communication
*
3
Communication standard
ISO/IEC 14443B (Type-B)
Frequency
13.56 MHz
Communication speed
20 to 100 kHz (I2C)
Communication distance
Up to 1 cm
*
1 The configuration file can be downloaded from the SMC website: https://www.smcworld.com
*
2 Varies depending on the wireless communication status and the surrounding environment
*
3 The NFC communication RFID tag of the 13.56 MHz passive type
27
