Troubleshooting
28
Network Connection Problems
If the Link LED on the SMC2802WV.2 does not light, or if you
cannot access network resources from the computer, check the
following:
•
Make sure the correct software driver is installed for your
operating system. If necessary, try reinstalling the driver.
•
Make sure the computer and other network devices are
receiving power.
•
The access point you want to attach to may be defective. Try
using another access point.
•
If you cannot access a Windows service on the network,
check that you have enabled and configured the service
correctly. If you cannot connect to a particular server, be sure
that you have access rights and a valid ID and password.
•
If you cannot access the Internet, be sure you have configured
your system for TCP/IP.
If your wireless station cannot communicate with a computer in
the Ethernet LAN when configured for Infrastructure mode, check
the following:
•
Make sure the access point that the station is associated with
is powered on.
•
If you still cannot connect, change the access point and all the
stations within the BSS to another radio channel.
•
Make sure the SSID is the same as that used by the BSS
configured on the access point, or the same as that used by
the access points in the extended service set (ESS).
Summary of Contents for EZ-Connect SMC2802W
Page 1: ...SMC2802W...
Page 7: ...Compliances iv...
Page 43: ...Terminology 34 Wireless devices without a valid WEP key are excluded from network traffic...
Page 44: ......
