5/8
FGX-OM-L010
2. Specifications
Table 2. Specifications
Parameter
Cantent
Note
Operating fluid
Fluid only
Gas is not allowed
Max. operating
pressure
0.7MPa
Max. operating temp.
80℃
Capacity
27L,43L,52L
Weight
19.5kg,23kg,30kg
Depends on element length
Applicable regulation
and standard
Not applied
Vessel
Accessory
Pressure
gauge
To measure inlet and outlet
pressure
Mountable(Option available)
Material
Filtration
Element
Element differential
element proof
Depends on element
See element specification for details
Others
Element replacement
differential pressure
0.1MPa
(Differential pressure)
3. Installation / Piping
1
)
Installation
・
Fix the feet to the ground firmly using foundation bolt(M12).
・
Install and arrange piping at the place with enough space for maintenance.
2
)
Piping
・
Check connect port size to use valves and fitting suitable for operating conditions.
・
Arrange the piping so that pressure in the product can be released.
※
Confirm cautions on page 2 and 3 for use.
4. Operation
1
)
Operation
・
Mount V band to specified position. Confirm connecting parts and seal do not leak before start
operation.
・
When starting operation, open upper relief port(loosen hex. plug) to discharge air.
2
)
Replacing the element
・
Replace the element when pressure drop become lower than specification value.
For the replacement of the element, see Replacement of the element on page 6.
※
Confirm cautions on page 2 and 3 for use.
Summary of Contents for FGG 20 A Series
Page 6: ...6 8 FGX OM L010 ...