HRX-OM-S010
Chapter 2 Contact input/output communication
HRS100/150 Series
2.4
Setting and checking
2-9
Contact input signal 2 delay timer of reading
Setting
and checking
15.
Press the [SEL] key once.
The set screen of contact input signal 2 delay timer of reading
is displayed on the digital
display.
16.
Select contact input signal 2 delay timer of reading from the table below with [
▲] key or [▼]
key, and confirm by pressing “SEL”.
Table
2.4-9
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting and checking are not available unless
contact input signal 2 is external switch signal
input (N.O. type or N.C. type).
to
Setting of
contact input signal 2 delay timer
of reading.
Set range is 0 to 300 sec.
Contact input signal 2 OFF detection timer
Setting
and checking
17.
Press the [SEL] key once.
The set screen of contact input signal 2 OFF detection timer is displayed on the digital
display.
18.
Select contact input signal 2 OFF detection timer from the table below with [
▲] key or [▼]
key, and confirm by pressing “SEL”.
Table
2.4-10
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting and checking are not available unless
contact input singal 2 is external switch signal
input(N.O. type or N.C. type).
to
Setting of
contact input signal 2 OFF
detection timer.
Set range is 0 to
1
0 sec.
PV
SV
PV
SV
