HRX-OM-S010
Chapter 5 Simple communication protocol function
HRS100/150 Series
5.3
Setting and checking
5-7
Slave addresses
（
simple communication protocol
）
Setting and checking
9.
Press the [SEL] key 3 times.
The set screen of slave address (simple communication protocol) is displayed on the digital
display.
10.
Select slave address (simple communication protocol) from the table below with [
▲] key or
[
▼] key, and confirm by pressing “SEL”.
Table 5.3-6
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial
protocol
setting
is
simple
communication protocol.
to
Setting
of
slave
address
for
simple
communication protocol.
Set range is 1 to 99.
Communication speed (simple communication protocol)
Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (simple communication protocol) is displayed on
the digital display.
12.
Select communication speed (simple communication protocol) from the table below with
[
▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.3-7
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial
protocol
setting
is
simple
communication protocol.
1200bps
2400bps
4800bps
9600bps
○
19200bps
PV
SV
PV
SV
