HRX-OM-R026
Chapter 5 Display and setting of various functions
HRSH Series
5.20
Alarm customizing function
5-53
Changing of circulating fluid discharge temperature rise Setting and checking
4.
Press the [SEL] key once.
The set screen of changing of circulating fluid discharge temperature rise is displayed on
the digital display.
PV
SV
5.
Select
changing of circulating fluid discharge temperature rise from the table below with
[
▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.20-9
List of set value
Set value
Explanation
Initial value
(Default setting)
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Detection temperature for circulating fluid discharge temperature rise Setting and checking
6.
Press the [SEL] key once.
The set screen of detection temperature for circulating fluid discharge temperature rise is
displayed on the digital display.
PV
SV
7.
Select detection temperature for circulating fluid discharge temperature rise from the
table below with [
▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.20-10
List of set value
Set value
Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the circulating fluid discharge
temperature rise is OFF.
Centigrade
to
Sets detection temp for the circulating fluid
discharge temperature rise.
Temperature unit is Centigrade : Setting unit is
0.1
o
C
Temperature unit is Fahrenheit : Setting unit is
0.1
o
F
Fahrenheit
to
