HRX-OM-R026
Chapter 5 Display and setting of various functions
5.21
Communication function
HRSH Series
5-70
Slave addresses(MODBUS) Setting and checking
9.
Press the [SEL] key once.
The set screen of slave addresses (MODBUS) is displayed on the digital display.
PV
SV
10.
Select slave addresses (MODBUS) from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.21-6
List of set value
Set value
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
to
Sets of slave addresses for MODBUS.
Set range is 1 to 99.
Communication speed (MODBUS) Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (MODBUS) is displayed on the digital display.
PV
SV
12.
Select communication speed (MODBUS) from the table below with [
▲] key or [▼] key,
and confirm by pressing “SEL”.
Table 5.21-7
List of set value
Set value
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
9600bps
19200bps
Slave addresses (simple communication protocol) Setting and checking
13.
Press the [SEL] key once.
The set screen of slave addresses (simple communication protocol) is displayed on the
digital display.
PV
SV
