SMC Networks HRW D Series, Operation Manual

HRX-OM-K021 

 
HRW Series 

3

1.1 Operation 

screen 

2.1.1 Menu screen 1 

Figure 2-2      Menu screen 1 

Table 2-1   Menu screen 1 

No. 

Item 

Descriptions 

1 REMOTE/LOCAL 

Switches to the “Mode Selection screen” with the press of the 
[ENT] key. 

2.1.2 Mode Selection screen 

Figure 2-3      Mode Selection screen 

Table 2-2   Mode Selection screen 

No. 

Item 

Setting 

LOCAL

*1

System start/stop and TEMP SP value setting are available only from the 
operation display panel. 

DIO REMOTE

*1

System start/stop is allowed only through contact signal. TEMP SP value 
setting is available only from the operation display panel. 

SER REMOTE

*1

System start/stop and TEMP SP value setting are available only through 
serial RS-485 communication. 

1 MODE 

DNET REMOTE 

System start/stop and TEMP SP value setting are available only through 
DeviceNet communication. 

*1: For the details of each communication mode, please refer to communication specification 

(HRX-PS-K005). 

　　　　　　＜ＭＥＮＵ＞
１．ＳＥＴＴＩＮＧ
２．ＲＥＭＯＴＥ／ＬＯＣＡＬ
３．ＩＮＩＴＩＡＬ　ＳＥＴ

1

＜ＲＥＭＯＴＥ／ＬＯＣＡＬ＞

ＭＯＤＥ：　ＬＯＣＡＬ

ＣＵＳＴＯＭ　ＤＩＯ　　　ＯＦＦ

1