２４
1)Direct connection
·
Fix the controller and high voltage power supply module using cross recessed round head screw
(M4x30).
Tightening Torque: 0.22 to 0.24Nm
2)Separate connection
·
For separate connection, an optional separate cable is required.
·
Mount the spacers (included) to fix the separate cable to the high voltage power supply module.
Fix the spacers (2 pcs.) to the plug (male side) of the D-sub connector on the high voltage power supply
module.
·
Connect the controller and high voltage power supply module after mounting the spacers and fix them
using 2 round head combination screws (M2.6).
Spacer tightening torque: 0.4 to 0.6 Nm
Separate cable tightening torque: 0.25 to 0.35 Nm
Dust cover
(Included)
M4 screw
(Included)
IZTC40, IZTC41
Controller
(Figure shows IZTC41)
IZTP40, IZTP41, IZTP42
High voltage power supply module
(Figure shows IZTP41)
M2.6
screw
M2.6
screw
IZTC40
、
IZTC41
Controller
(Figure shows IZTC40)
IZT40-CF
□
Separate cable
IZTP40
、
IZTP41
、
IZTP42
High voltage power supply module
(Figure shows IZTP40)
Spacer
(Included)
D-sub connector
socket
D-sub connector
plug
Summary of Contents for IZT40 Series
Page 1: ...Document No IZ OMT0049 B PRODUCT NAME Ionizer MODEL Series IZT40 41 42series...
Page 73: ...High voltage power supply module IZTP40 IZTP41 When DIN rail mounting bracket IZT40 B2 is used...
Page 74: ...High voltage power supply module IZTP42 When DIN rail mounting bracket IZT40 B3 is used...
