７
10) Be sure to remove power supply and air supply to the controller, high voltage power supply module
and bar before starting the product installation.
·
If installation or adjustment is performed being supplied with power or air, electric shock, failure or injury can
result.
11) High voltage power supply module uses a fan. 20mm or
more space from the exhaust port is necessary for
ventilation.
·
Or install the product in a ventilated location so peripheral
device are not affected.
12) Do not damage the cable or apply a heavy object or pinch
the cable. Avoid repeatedly bending or stretching the
cable.
·
It may cause an electric shock, fire, or breaking of wire.
13) Do not carry this product by holding its cables.
·
It may cause an injury or damage to the product.
1) When IZT4
□ series is installed, keep space below from structures or components.
·
If there are electrically conductive objects such as walls or structures close to the bar, generated ions may
not reach the target object effectively or product failure or electric shock can result due to dielectric or
short-circuit.
2) After installation, verify the performance of this product.
·
The performance of the product varies depending on the surrounding installation and operating conditions.
After installation, verify the performance of this product.
3) When installing Ionizers which operate in DC mode (one polarity, positive or negative) with IZT41 or
IZT42 close together, they should be positioned at least two meters away from each other.
·
When IZT41 or IZT42 which operates in AC close to
the Ionizer which operates in DC mode, separate
them by at least two meters. The offset voltage
(ion balance) may not be adjusted by the built-in
sensor due to the ions discharged from the Ionizer
which operates in DC mode.
4) Use specified end bracket.
Caution
Unit :mm
18.1
72.1
18.1
50.5
50.5
IZT40/41 IZT42
Exhaust port
Controller
High voltage
power supply
module
2m or more
DC mode
AC mode
In case of IZTB40
Bracket at the end of the bar
Fitting
Summary of Contents for IZT40 Series
Page 1: ...Document No IZ OMT0049 B PRODUCT NAME Ionizer MODEL Series IZT40 41 42series...
Page 73: ...High voltage power supply module IZTP40 IZTP41 When DIN rail mounting bracket IZT40 B2 is used...
Page 74: ...High voltage power supply module IZTP42 When DIN rail mounting bracket IZT40 B3 is used...
