ASSEMBELY KNAPSACK BRUSH CUTTER
STEP-1
1. Install the soft pipe to the engine.
2. Join the wire of throttle lever & engine.
3. Turn the throttle wire round from the muffler side.
4. Secure the lead wire/throttle wire to the machine, using the wire band.
STEP-3
1. Join the soft pipe with main pipe.
Fitting bolts X 4 PCS
2. Join the Loop handle with main pipe.
Fitting bolts X 4 PCS
3. Join the safety guard to the brush cutter
attachment.
Fitting bolts X 2 PCS
STEP-2
Fixed the throttle lever
line on the throttle lever.
STEP-4
Blade Mounting
1. Attach the Prevention Plate to
the bottom of the Gear Case
using the Cross Screw.
2. Install the Blade Clamping plate
onto the gear shaft.
3. Tightly fasten the Blade
Clamping Plateb, Stabilizing
Plate & Washer with Blade
using the Hexagon Nut
・
Use the spanner.
・
Be careful of injury from the
Blade.
・
When mounting the blade,
bear in mind that the direction
of rotation is counter
clockwise.
