97
9 Appendices
9.1 Keypad Default Settings for IPPBX
IPPBX has some default keypad settings for general users to directly access functions
via the keys on a phone.
Table 91 Keypad Default Settings for IPPBX
Keypad Description
*8
If extensions are in the same pickup group
23
, any extension in the
pickup group can press *8 to pick up the call in ringing state
.
*# + extension
Press *# plus an extension number to transfer the call to the extension.
Note:
When the caller from trunks press *# to transfer the call, the third
party will see the caller ID of caller.
*# + Call Park Pilot
Number
Press *# plus Call Park Pilot Number to transfer the call to Call Park
24
.
9.2 Manage with CLI Commands
9.2.1 Instruction
The IPPBX Console Interface (CLI) administration guidelines describe how to manage
some basic functions of the IPPBX using console interface. The console interface is set for two
levels, general user and system administrator. General users can see general information
once login to the interface. System administrator requires entering password of the admin to
use more functions such as add, edit and delete user, usergroup, and import or export data.
9.2.2 Console Interface
By connecting to console port, general users can see some basic information. System
administrator can enter some commands for adding, editing, deleting debugging.
9.2.2.1 Connection
1. Connect the console port with a computer using RS232.
2. Open a terminal emulator such as HyperTerminal on the computer.
3. Configure the serial port setting as follows:
!
Baud
Rate:
115200
23
Refer to
Table 6.3.
for more detail of pickup group.
24
Refer to
Error! Reference source not found.
for more detail of Call Park.
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
