13
3.1.5.2 Add Extension (for Analog Phone)
1. Enter settings shown in
Table 3.1.5
.
2.
Click
ADD
to see the newly added analog phone in the table of the webpage.
3.
Click
Finish
to finalize all the settings, and go back to the homepage.
For deleting an analog phone, select a POTS port and click
DEL
.
Table 3.1.5 Add Analog Phone Settings
Field Description
POTS Port
FXS port index. The value should be either 3 or 4
dependant on which phone (FXS) port the analog
phone is connected.
Pickup Group
The pickup group that the extension belongs to.
Extension Number
A unique line number composed of digits only, e.g. 101;
32 digits maximum.
Unavailable Timeout
Timeout for ringing before a call is answered.
User
5
Select a user that this extension associates with.
#
If there is not any appropriate users to select, one
can come back later once the expected user has
been added.
Voicemail
Select
Enable
to allocate voicemail account for the
extension.
Voicemail PIN
PIN to access voicemails. This is mandatory if above
voicemail option is enabled.
Max Voicemail Space
Enter maximum space in KBytes for voicemail.
3.2 Add Trunk Wizard
In Add Trunk Wizard, the administrator can setup routes, routgroups and trunks.
Moreover, worktime and IVR are included in this part for assigning to trunks. You can follow the
following steps to finish configuration. After finishing configuration, click
at the
bottom of the homepage to take the configuration effect.
5
Please refer to
6.1
for details.
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
