20
be given by the service provider side so that a
correct stripping could be configured accordingly.
DID Prefix
A digit string to be prefixed to the incoming called
number after stripping.
DID Stripping
A number of leading digits to be stripped from the
original called number. If prefix or stripping has been
given but
DID of Extension
is not
By Number
or
By
Privilege
, the result of digit manipulation is dialed in a
DTMF string after the call has been answered by the
DID extension as an automatic 2
nd
dialing. Click
All
to
strip all digits of the original called number.
IVR List
10
Associate an IVR menu with incoming calls to this
trunk. This is mandatory unless the trunk is configured
for DID. Leave it blank and the system will
automatically create an IVR for the trunk.
Usergroup
11
of Privilege
When disabled DID, click a usergroup in the list whose
reachability to other usergroups and trunks will be used
as the privilege of inbound calls from this trunk.
#
There may not be any appropriate usergroups to
select initially. One can come back later to revise
it, once the expected usergroups are added.
Caller ID Detection
Select to detect the Caller ID calling from PSTN lines.
Answering by Battery Reversal
Detection
If the PSTN service provides battery reversal, select to
count billable time starting from the call is answered.
#
Clear the check box, if you are not sure whether the
PSTN service provides the function.
3.2.5 Assign Trunk
In ASSIGN TRUNK page, all usergroups display here. The administrator can assign
trunks to any usergroup at this stage.
1.
Click a group ID to see the Assign Trunk Management.
2.
Enter settings shown in
Table 3.2.4
.
3. Click
or
to add or delete the associate trunks. After add all trunks, click
APPLY
.
10
Please refer to
7.1
1
for details.
11
Please refer to
6.2
for details.
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
