27
given gateway IP address sits in the IPPBX’s LAN. Each subnet requires an entry even
multiple subnets share the same gateway, unless masking does the same. Examples are
adding IP Route IDs
net1
and
net2
with parameters 192.168.128.0/255.255.255.0,
192.168.129.0/255.255.255.0, shared gateway 192.168.1.254 respectively. Or, IP Route ID
net1n2
with 192.168.128.0/255.255.254.0 and gateway 192.168.1.254 would do the same.
Added routes enable routing immediately after clicking
ADD
. However, the IPPBX Service
needs to be restarted to regard calls from designated LAN subnets as LAN traffic. Go to
Service
-->
IPPBX Service
, and click
Restart
to regard calls as LAN traffic.
4.5.1 Add a Route
1. Enter the
IP Route ID
,
Network
,
Netmask
, and
Gateway
.
2.
Click
ADD
to have the newly added route in
IP Rout ID
.
4.5.2 Edit a Route
1. Edit the information in a row.
2.
Click
APPLY
in the row to update the information.
4.5.3 Delete a Route
1. Select a route ID.
2.
Click
DEL
to remove the route ID from the
IP Route ID
column.
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
