40
5.5.1 Enable DHCP Service
Click
Enable
, choose the main interface offering addresses, and then
APPLY
to
configure DHCP settings.
5.5.1.1 Add DHCP Range
1.
Click
CLEAR
.
2. Enter a pool name (must have an alphabet initial) in
Pool Name
.
3.
Select
Single-host
to enter an IP address of the host with
MAC
, if the binding is
intended for a specific host only.
4. Enter a DHCP range of addresses available for lease in
IP
. The right address box will
not show if
Single-host
is selected.
5. Optionally, DHCP options
12
could be configured by entering an option code and value
in
Code, Value
and click
ADD
. The new DHCP option will show in the
OPTIONS
list. To delete
an option, choose it from the
OPTIONS
list and click
DEL
after the box.
6.
Click
ADD
at the bottom of the page to commit changes.
You can see the newly added DHCP POOL displayed in the
DHCP POOL
list.
5.5.1.2 Edit DHCP Range
1. Click any pool name in the
DHCP POOL
list to see the settings on the right.
12
Refer to RFC 2132 for the details of available DHCP options.
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
