C
HAPTER
6
| Network Settings
WAN Setting
– 65 –
◆
Budget Policy
— Specifies the action to take when budget limits have
been reached.
■
Action if Over Budget
— Specifies the the action to take when a
budget limit has been exceeded:
■
Drop Current Connection
— Immediately drop the current
connection. (Default: Enabled)
■
Disallow New Connection
— Do not permit any new
connections. (Default: Enabled)
■
Trigger by Limit Budget
— Specifies the percentage of the time
or data budget at which to start sending E-mail alerts at the
indicated time interval. When E-mail alerts are enabled, be sure to
configure the E-mail settings. (Default: 90% of budget, E-mail
Alerts disabled, recurring every 10 minutes)
◆
Budget Counter
— Select the day of the month on which to reset the
time/data budget counters. (Default: 1st day per month)
Figure 34: 3G Configuration - E-mail Settings
The following items are displayed in this section on this page:
◆
E-mail Settings
— The unit can use SMTP (Simple Mail Transfer
Protocol) to send E-mail messages when triggered by the specified
budget policy limits.
■
Mail SMTP Authentication
— Specifies a user name and password
for SMTP server authentication. (Options: PLAIN, LOGIN, or
Disabled.)
■
User Name
— Enter the user name for the SMTP server account.
■
Password
— Enter the password for the SMTP server account.
■
Mail Server
— Specifies the URL of the SMTP mail server that will
send the alert messages.
■
Mail Sender
— Specifies an E-mail address on the SMTP server
that will send the alert messages.
