C
HAPTER
7
| Wireless Configuration
WLAN Security
– 83 –
The supported security mechanisms and their configuration parameters are
described in the following sections:
◆
OPEN, SHARED, WEP-AUTO
— See
“Wired Equivalent Privacy (WEP)”
on page 83
◆
WPA-PSK, WPA2-PSK, WPA-PSK_WPA2-PSK
— See
“WPA Pre-
Shared Key” on page 84
◆
WPA, WPA2, WPA1_WPA2
— See
“WPA Enterprise Mode” on
page 85
◆
802.1X
— See
“IEEE 802.1X and RADIUS” on page 87
W
IRED
E
QUIVALENT
P
RIVACY
(WEP)
WEP provides a basic level of security, preventing unauthorized access to
the network, and encrypting data transmitted between wireless clients and
an access point. WEP uses static shared keys (fixed-length hexadecimal or
alphanumeric strings) that are manually distributed to all clients that want
to use the network.
When you select to use WEP, be sure to define at least one static WEP key
for user authentication or data encryption. Also, be sure that the WEP
shared keys are the same for each client in the wireless network.
Figure 45: Security Mode - WEP
The following items are displayed in this section on this page:
Security Mode
— Configures the WEP security mode used by clients.
When using WEP, be sure to define at least one static WEP key for the Mini
3G Broadband Router and all its clients. (Default: Disable)
◆
OPEN
— Open-system authentication accepts any client attempting to
connect the Mini 3G Broadband Router without verifying its identity. In
this mode the default data encryption type is “WEP.”
◆
SHARED
— The shared-key security uses a WEP key to authenticate
clients connecting to the network and for data encryption.
