manualshive.com logo in svg

SMC Networks WPCI-G - annexe 1, Management Manual

The SMC Networks WPCI-G - annexe 1 is a high-performance wireless PCI adapter that allows quick and easy installation for seamless internet connectivity. You can download the user manual for this product for free from our website, providing detailed instructions and technical specifications.

Share
Download
background image

Q

UALITY

 

OF

 S

ERVICE

 C

OMMANDS

32-6

• A policy map can contain multiple class statements that can be applied 

to the same interface with the 

service-policy

 command (page 32-10). 

• You must create a Class Map (page 32-5) before assigning it to a Policy 

Map.

Example 

This example creates a policy called “rd_policy,” uses the 

class

 command 

to specify the previously defined “rd_class,” uses the 

set

 command to 

classify the service that incoming packets will receive, and then uses the 

police

 command to limit the average bandwidth to 100,000 Kbps, the 

burst rate to 1522 bytes, and configure the response to drop any violating 
packets.

class

This command defines a traffic classification upon which a policy can act, 
and enters Policy Map Class configuration mode. Use the 

no

 form to 

delete a class map and return to Policy Map configuration mode.

Syntax 

[

no

] 

class

 

class-map-name

class-map-name

 - Name of the class map. (Range: 1-16 characters)

Default Setting 

None

Command Mode 

Policy Map Configuration

Command Usage 

• Use  the 

policy-map

 command to specify a policy map and enter 

Policy Map configuration mode. Then use the 

class

 command to 

Console(config)#policy-map rd_policy
Console(config-pmap)#class rd_class
Console(config-pmap-c)#set ip dscp 3
Console(config-pmap-c)#police 100000 1522 exceed-action drop
Console(config-pmap-c)#

Summary of Contents for WPCI-G - annexe 1















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WPCI-G - annexe 1

3Com Server User Manual preview
Server
Brand: 3Com Pages: 48
Eaton Power Xpert Meter 2000 Instructions Manual preview
Power Xpert Meter 2000
Brand: Eaton Pages: 16
Eaton POW-R-COMMAND 1000 User Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 84
Paradyne FrameSaver 9120 Installation Instruction Supplement preview
FrameSaver 9120
Brand: Paradyne Pages: 2
TC Electronic DB6 User Manual preview
DB6
Brand: TC Electronic Pages: 174
Comelit IPNVR004BPOE Manual preview
IPNVR004BPOE
Brand: Comelit Pages: 19
Waver WAC52N Quick Start Manual preview
WAC52N
Brand: Waver Pages: 36
Wave wifi MBR Series Quick Start Manual preview
MBR Series
Brand: Wave wifi Pages: 3
Firetide HotPort 3103 User Manual preview
HotPort 3103
Brand: Firetide Pages: 32
LevelOne GSW-0890 Quick Installation Manual preview
GSW-0890
Brand: LevelOne Pages: 4
Garderos R-3700 Series Operating Manual preview
R-3700 Series
Brand: Garderos Pages: 21
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Brand: ZyXEL Communications Pages: 2
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Brand: ZyXEL Communications Pages: 263
Atlantis Land 32 bit 10/100 Fast Ethernet Card A02-S32-S Quick Installation Manual preview
32 bit 10/100 Fast Ethernet Card A02-S32-S
Brand: Atlantis Land Pages: 9
ZyXEL Communications Prestige 642R Series User Manual preview
Prestige 642R Series
Brand: ZyXEL Communications Pages: 163
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Brand: LevelOne Pages: 45
LevelOne CamCon FCS-4000 User Manual preview
CamCon FCS-4000
Brand: LevelOne Pages: 94
TDT VR2020 Series Initial Start-Up Manual preview
VR2020 Series
Brand: TDT Pages: 8

Brands by name

Popular brands

Load more brands