Z_ISE3-TF2Z043EN
Page 3 of 3
11 Maintenance (continued)
•
Replacement of filter elements
If element clogging causes deterioration of the adsorption force or slows
the response time, stop operation and replace the element.
Filter element part no.: ZX1-FE
Confirm that the filter gasket is seated in the groove before reassembling
the parts.
Filter gasket part no.: ZX1-FG
•
Filter cases
The case is made of polycarbonate. Therefore, do not use the product in
an environment that is exposed to chemicals such as thinners, carbon
tetrachloride, chloroform, acetic ester, aniline, cyclohexane,
trichloroethylene, sulfuric acid, lactic acid, or water-soluble cutting oil
(alkalinic).
12 Limitations of Use
12.1 Limited warranty and Disclaimer/Compliance Requirements
Refer to Handling Precautions for SMC Products.
Caution
•
SMC products are not intended for use as instruments for legal
metrology.
Measurement instruments that SMC manufactures or sells have not
been qualified by type approval tests relevant to the metrology
(measurement) laws of each country.
Therefore, SMC products cannot be used for business or certification
ordained by the metrology (measurement) laws of each country.
13 Product Disposal
This product shall not be disposed of as municipal waste. Check your
local regulations and guidelines to dispose of this product correctly, in
order to reduce the impact on human health and the environment.
14 Contacts
or
importer.
URL:
(Global)
(Europe)
SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, Japan
Specifications are subject to change without prior notice from the manufacturer.
© 2021 SMC Corporation All Rights Reserved.
Template DKP50047-F-085M
