Cleaning and maintenance
72
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections
A
are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
4.7 Cleaning the door glazing
The door glazing should always be kept
thoroughly clean. Use paper towel. In case
of persistent dirt, wash with a damp sponge
and an ordinary detergent.
Removing internal glazing
(multifunction model)
For easier cleaning the internal glazing
panes of the door can be removed.
1. Open the door.
2. Position the locking hooks in the hinge
holes to prevent accidental closing of
the door.
3. Remove the internal glazing pane by
pulling the rear part gently upwards,
following the movement indicated by
the arrows (
1
).
4. Pull the internal glazing pane from the
front strip (
2
) to remove it from the door.
Summary of Contents for A11XPY-9
Page 88: ......
