Smeg ALFA41VEK, Installation Manual

Instructions for the User

this the oven switches off. During this stage, the display shows the 
parameters of the selected program).  
N.B. – although this is not recommended in terms of cooking quality, the 
program can be started even before the preheating temperature is 
reached by pressing 

START

.  

During cooking, the display shows the time left until the end of the cooking 
process and the temperature set. During the last minute of cooking, the 
display will only show the countdown from 60 to zero seconds (end of 
cooking time). When all the cooking time has passed, a BEEP will sound 
for 20 seconds and the display will show "End".  
During these 20 seconds the user can extend the cooking time as 
required, in manual mode, as follows. Press 

START

; the display will show 

"tp00". From now on, each pressure on the 

START

 key corresponds to 

one more minute's cooking; up to 10 extra minutes are permitted. Cooking 
will restart at the programmed temperature after 5 seconds.  
After these additional minutes, the program repeats the cooking end 
procedure described above and after the 20-second BEEP the word “

End

" 

will flash for 20 minutes, during which time the temperature will gradually 
fall, stabilising at 100°C. After 20 minutes, the oven switches off. 

29