12
Instructions for the Installer
CHANGING THE NOZZLES
REPLACING THE BURNER SECTION NOZZLES
1
Remove the grids and refractory plates inside the
barbecue section.
2
Undo the screws (for each burner) on the rear
cross-member.
3
Remove the burners from the barbecue section.
4
Using a 7 mm socket wrench, undo the nozzles on
the taps (replace the nozzles as specified in the
table above).
5
Adjust the primary air flows (see adjusting primary
air flows section).
6
Put the burners back into place correctly and
tighten the fixing screws.
REPLACING THE RADIANT GRILL NOZZLES (ON
TOP VERSIONS ONLY)
1
Remove the rear of the barbecue by undoing the
supporting screws.
2
Using a 7 mm spanner, unscrew the nozzle (
1
).
3
Replace the nozzles as specified in the table
above. To make it easier to fit the nozzle, the nut
(
2
) can be unscrewed.
4
Retighten the nut (
2
) with great care.
5
Fit the rear part back into place and screw on with
the fixing screws.
REPLACING THE ULTRARAPID BURNER NOZZLE
(BQ6030 MODELS ONLY)
1
Remove the grid, the burner cap and the flame
diffuser ring.
2
Using a 7 mm socket wrench, unscrew the burner
nozzle.
3
Replace the nozzle as specified in the table above.
4
Put the burner, the burner cap and the flame
diffuser ring back into place correctly.
5
Fit the rear part back into place and screw on with
the fixing screws.
1
2
